Access the most recent issue of Label & Narrow Web magazine, along with a complete archive of past editions for your reference.
Read the full digital edition of Label & Narrow Web, complete with interactive content and enhanced features for an engaging experience.
Join our community! Subscribe to receive the latest news, articles, and updates from the label and narrow web industry directly to your mailbox.
Access real-time updates on significant events and developments within the label and narrow web sector.
Learn about the latest updates and innovations from converters in the label and narrow web industry.
Stay informed on industry news and developments specifically affecting the European label and narrow web market.
Explore a broad range of news stories related to the label and narrow web industry, including technology advancements and market shifts.
Get insights into key individuals and leadership changes within the label and narrow web sector, celebrating achievements and contributions.
Stay updated on mergers, acquisitions, and financial developments impacting the label and narrow web industry.
Read feature articles that delve deeper into specific topics, technologies, and trends in the label and narrow web industry.
Access unique articles and insights not available elsewhere, featuring in-depth discussions and expert analysis.
Gain insights from industry experts who share their perspectives on current trends, challenges, and opportunities in the label market.
Explore detailed analyses and reports on label market dynamics, consumer preferences, and emerging technologies.
Discover engaging blog posts covering various topics related to the label and narrow web industry, including tips and trends.
Explore ancillary products and solutions that support label production, including finishing and application technologies.
Stay updated on converting technologies and practices that enhance efficiency and quality in label manufacturing.
Learn about finishing techniques and solutions that add value and enhance the appeal of label products.
Stay informed on flexographic printing technologies and innovations that drive efficiency and quality in label production.
Discover advancements in digital printing technologies and their applications in the label and narrow web industry.
Explore the latest developments in UV curing technologies that improve the performance and durability of labels.
Looking for a new raw material or packaging component supplier? Your search starts here.
Watch informative videos featuring industry leaders discussing trends, technologies, and insights in the label and narrow web sector.
Enjoy short, engaging videos that provide quick insights and updates on key topics within the label industry.
Tune in to discussions with industry experts sharing their insights on trends, challenges, and innovations in the label market.
Explore new and innovative label products and solutions, showcasing creativity and technological advancements at Label Expo.
Access comprehensive eBooks that delve into various topics in label printing and production technologies.
Read in-depth whitepapers that examine key issues, trends, and research findings in the label industry.
Explore informational brochures that provide insights into specific products, companies, and market trends.
Access sponsored articles and insights from leading companies in the label and narrow web sector.
Browse job opportunities in the label and narrow web sector, connecting you with potential employers.
Discover major industry events, trade shows, and conferences focused on label printing and technology.
Get real-time updates and insights from major label and narrow web exhibitions and shows happening around the world.
Participate in informative webinars led by industry experts, covering various relevant topics in the label and narrow web sector.
Explore advertising opportunities with Label & Narrow Web to connect with a targeted audience in the label and narrow web sector.
Review our editorial guidelines for contributions and submissions to ensure alignment with our content standards.
Read about our commitment to protecting your privacy and how we manage your personal information.
Familiarize yourself with the terms and conditions governing the use of labelandnarrowweb.com.
What are you searching for?
October 11, 2010
By: Greg Hrinya
Editor
The wind blew very, very hard several weeks ago here in Chicago. After the storm I went out to see if there was any damage. Our yard was fine but a neighbor lost a huge maple tree, probably 75 to 85 years old. I went over to look at the damage and noticed that the trunk had snapped off about 20 feet up. This was odd, so my inspection continued. When I looked closely I saw that the wood was punkie; it was worthless and had no value. My dad had taught me that word. In the context of the tree it meant that the tree had no fiber, it was rotten and wouldn’t even make good fire wood. In the context of business I define punkie as “of little substance”: no strengths, no program, not sustainable, not certifiable, not practical, and so on. I was fascinated to later learn that there actually is a punk tree. It is called a cajuput, an Australian, myrtaceous tree or shrub having lanceolate, aromatic leaves. My dad never told me about punk trees. Probably just as well. Punkie, it seems to me, is exactly what is happening in Washington DC, where the Environmental Protection Agency (EPA) has decided not to define nonhazardous secondary materials recycled by manufacturers for heat recovery as solid waste. The issue with the EPA is a proposed rule that would allow manufacturing and industrial facilities to recycle spent solvents, fuels, scrap plastics, shredded tires, used oil, and industrial sludge in boilers or process heaters for the purpose of heat recovery. These facilities would not have to comply with the Clean Air Act emission restrictions. This is downright punkie and makes no sense at all. The latter part of the proposal is the problem. If these same secondary materials were simply being disposed of in a boiler, what is called “absent recycling,” emission restrictions would come into play. A final EPA rule in 2000 established emission controls for the category of “commercial and industrial solid waste incinerators” – the CISWI Rule. This was challenged in 2001, but only as it pertained to cement kilns. Suffice it to say, we have been debating the issue of solid waste recycling for almost 10 years and this has resulted in the proposed rule that came out early this summer. Balderdash and punkie. What is not punkie is the responsibility of the generator of byproduct to follow closely regulatory requirements. I became aware of a situation involving a convertor who was cited by a state agency for failure to comply with hazardous waste management and liquid industrial waste regulations. An inspection at a manufacturing site determined violations of the following statutes: a) A person (company) that generates a solid waste must determine if that waste is hazardous or not; b) Must maintain copies of waste evaluation on site for three years from the date the waste was last sent for off-site treatment or storage. There are definitely teeth in this kind of regulatory law and it is the responsibility of the generator to follow the requirements to the letter. If you use a third party to handle disposal you must require them to be compliant. Neither the plant that was inspected nor their third party had copies of waste characterizations for the following waste streams: -Spent mineral spirits -Spent non-hazardous parts washer waste -Spent used oil -Spent rags contaminated with ink While the EPA’s failure to define non-hazardous materials for consumption in a boiler is punkie, the above is specific and requires close compliance with regulatory requirements. In other words, mind the law or pay the consequences. In another case, the EPA has a proposal that I believe is counterproductive to industry and our economy. It makes me wonder if Washington sometimes provokes just to be downright onerous. In this particular case, EPA is proposing a rule under the Maximum Achievable Control Technology (MACT) Act that will affect emissions from industrial boilers. The costs for the pulp and paper industry alone could approach $12 billion in new capital equipment. At risk are 30 paper mills and almost 17,000 jobs. If you further extrapolate, there is an estimated ripple effect of 3.25 jobs related to each pulp and paper worker, which explodes to a minimum of 100,000 lost jobs due to stricter air pollution regulations. American Forest and Paper Association CEO Donna Harman says, “EPA has a choice – they can regulate in a way that protects both jobs and the environment or they can regulate in a way that sacrifices jobs.” Even new paper mill power plants would probably be out of compliance. She continues, “The EPA methodology used in establishing the rule is unrealistic and urges the agency to use a risk-based approach to avoid costly and conflicting controls.” I’m all for cleaner emissions, but want to use judgment, reality, and economic practicality in arriving at better emission levels. This one doesn’t make sense and I will want to discuss the proposed changes in a future column. Proactive or punkie, that’s the question. Defining “green” requires sorting fact from fiction. In other words, weed out the “greenwash” from the truly green. Here’s how complicated this can be: How do you define a green cleaner? What characterizes a green lubricant? If a cleaner is biobased but cannot be disposed down a drain, is it green? If a lubricant can’t be drain-disposed but can be made into biodiesel, then is it green? If a lubricant is biobased and biodegradable but was created using hazardous fertilizers and insecticides, is it green? What if a solution is biobased, drain-disposable, grown organically and locally, contains zero percent hazardous chemicals, is recirculated, and then delivered by bicycle, but is not effective at its intended purpose and therefore the material it’s intended to lubricate or clean deteriorates and must be discarded before its intended life cycle – is it green? (I love that one). All of these are from Kate Bachman, the editor of Green Manufacturer. She poses great questions as all of us, Walmart included, try to take punkie out of definitions and measurements. Someone said, “It isn’t easy being green.” I think it was Kermit the frog, on Sesame Street. Boy, was he was right. Last night I had dinner at a restaurant that claimed everything on its menu was organic. Salads and pastas are easy. Beef, fish, and pork are more difficult. I decided to leave it alone and sit back and have a second martini. I didn’t want to become an argumentative punk. Another Letter from the Earth. Calvin Frost is chairman of Channeled Resources Group, headquartered in Chicago, the parent company of Maratech International and GMC Coating. His email address is [email protected].
Enter the destination URL
Or link to existing content
Enter your account email.
A verification code was sent to your email, Enter the 6-digit code sent to your mail.
Didn't get the code? Check your spam folder or resend code
Set a new password for signing in and accessing your data.
Your Password has been Updated !